How To Paint Kitchen Cabinets

How to paint kitchen cabinets yourself? It is a good, cost-effective way to completely revamp your kitchen – without an expensive full-scale complete kitchen renovation. Kitchen cabinet painting is also the perfect way for a fresh new look to your cabinets without all the hassle.

If you need to save money, consider painting cabinets yourself. The time it takes to perform this task is well worth the results. Rather than spending money on hiring a painting contractor to revamp your counters, your family handyman can use his own skills and experience to transform your countertops to give your kitchen a whole new look.

You’ll first need to prepare your surfaces. This includes removing any trim, such as the decorative metal that runs along the bottom edge of your cupboards. Trim pieces that aren’t included in the package should be purchased separately to make sure they are included in your painting cabinets when you purchase them. If they aren’t, you can always purchase them from a hardware store.

Painting is easier if the cabinets are already painted. However, if they aren’t, you’ll have to start from bare wood. Begin by applying a thin layer of primer to your cabinets before you apply the new coat of paint. Primer protects the surface from scratches and helps it dry faster so your new paint will stick better. Don’t forget to allow your cabinets to dry thoroughly between coats.

Start by applying the first coat of paint to your cabinets using a can of semi-gloss, oil-based latex paint. Next, use a sanding sponge to sand the areas that are unfinished. The goal is to create a smooth surface. You may want to experiment with different grit sandpaper to accomplish this goal.

Now you can begin spraying your kitchen cabinets. When spraying them, start at one corner at a time and work your way across the entire cabinet. It may be helpful to draw a line or two on your paper to indicate where you want to spray each coat. Use a water-based acrylic paint that is designed for outdoor use on wood grain cabinets.

After spraying the cabinets, you can apply new hardware. You can do this by hand or with an airbrush. For the best results, use an airbrush to give the doors and cabinet pulls and doors and drawer fronts a smooth, matte finish. Once dry, sand the hardware to match the rest of the room.

To complete your project, make sure that you wipe down the cabinet boxes and the cabinet frames with a tack cloth to remove any dust particles. You can also use a vacuum to make sure all dust is out of the way. After wiping down the surfaces, let them dry for at least 24 hours before you use them. Before opening up your cabinets, make sure that they are completely dry and clean. When you are ready to paint the doors and drawer fronts, apply a coat or so of thin wood color over the entire surface, including the areas between the coats of wood color. Let dry and your Cabinets will be looking like new hardware.

The same process of painting kitchen cabinets applies when you are installing new ones. In addition to applying the wood color, you will need to fill in any gaps in the cabinet surfaces with either wood filler or putty. Once the putty has dried, sand the new surface until it matches the other surfaces in your kitchen. Sanding will also help the paint adhere better to the cabinet box.

For the first coat of paint, lightly sand the surfaces to get rid of scratches and evenly distribute the paints. Let dry for about an hour before proceeding to the next coat. This process can take several hours depending on the surface being painted. Once your first coat of paint is dry, you can proceed to the next. Do the same process with the following coats of paint.

A beautiful, smooth finish can be achieved by applying three thin coats of paint. The first coat should be primer-on. Then, apply a second coat of white paint that is slightly darker than the first coat. Finally, apply the third coat of a lemon scent paint. Allow each coat of paint to dry to get the best smooth finish.

When your kitchen cabinet doors are painted, there is no need to hire a professional painter to do the job for you. If you have the right tools, a little bit of creativity and a bit of patience, you can accomplish a professional-like paint job in only a couple of hours. To get the professional look, you’ll also want to invest in quality cabinet boxes, brushes and paint. If you do this part of the project yourself, make sure that you follow the step-by-step instructions that come with the painting supplies you buy. This will allow you to get the smoothest finish possible.